ChisuCutWeave™ Lightweight Cut-Resistant Knitted Fabric Architecture

A configurable material & knitting platform engineered for blade contact, sharp-edge abrasion and high-speed friction — without the weight of traditional protective textiles.

  • 180–380 g/m² configurable weight
  • EN 388 Coupe · ISO 13997 TDM · ANSI/ISEA 105 multi-standard
  • UHMWPE / HPPE high-strength polyethylene fiber system

Overview

Section Title：​ Not a single fabric. A configurable platform.
ChisuCutWeave™ is ChisuSport's proprietary lightweight cut-resistant knitted fabric architecture. Rather than a fixed fabric spec, it is a configurable material and knitting technology platform: by adjusting fiber composition, knitting structure, elasticity, fabric weight and surface treatments, the same architecture delivers different levels of cut resistance while preserving flexibility, comfort and low weight.
Designed for sports involving: Blade contact · Sharp-edge abrasion · High-speed friction
Primary applications:​ Short-track speed skating · Competitive skiing · Ice hockey · Kart racing

Material System

UHMWPE -Primary cut-resistant fiber — high strength-to-weight ratio, abrasion & chemical resistance

HPPE -Tensile strength & resistance to blade penetration

Non-glass inorganic fibers -Thermal & dimensional stability; explicitly excludes glass fibers to reduce skin irritation

Elastic yarns -Multi-directional stretch, recovery, garment shape retention

Skin-contact yarns -Fine-denier nylon / functional yarns — moisture management, low friction

Surface treatments -Blade-Slip, antibacterial, anti-pilling, Cold-Flex, abrasion-resistant finishes

Key Technical Mechanisms

Fiber-Level Cut Resistance UHMWPE and HPPE combine high tensile and specific strength. On blade contact, fibers deform, redistribute local loads, slide within the knitted structure and absorb energy — reducing penetration depth.
 Knitted-Structure Engineering Controlled high-strength yarn orientation, localized stitch-density adjustments, integrated cut-resistant & elastic layers, plus floating-yarn / inlay-yarn / double-layer constructions. Cut resistance without sacrificing stretch.
 Elasticity Optimization by Sport SportElasticity Priority

Short-track speed skatingHigh recovery, low hysteresis, unrestricted hip movement in corners

Ice hockeyTear & deformation resistance under impact and tensile loading

Competitive skiingClose fit, aerodynamic performance, shoulder & elbow mobility

Kart racingAbrasion resistance, seat-belt friction resistance, torso stability

Blade Slip Surface Treatment A functional finish that encourages blades and sharp edges to slide along the fabric surface rather than penetrate directly — reducing instantaneous penetration depth without compromising breathability, hand feel or post-wash dimensional stability. The fabric is not claimed to be cut-proof. Cold Flex  Low-Temperature Adaptation Material selection and elastic formulation that reduce stiffening at sub-zero temperatures — preserving flexibility, elastic recovery and stable cut-resistance in cold-weather environments.

Configurable Fabric Matrix 

Section Title：​ 180–380 g/m² · 11 representative configurations
Fabric-level specifications, not classifications of finished garments. Actual performance must be confirmed by test reports for the relevant production batches.

Fabric Code Weight (g/m²) Coupe Rating TDM Rating Cut Resistance (g)
CCW-180-L2A2 180 L2 A2 —
CCW-200-L3A2 200 L3 A2 —
CCW-220-L3A3 220 L3 A3 —
CCW-240-L4A5 240 L4 A5 2637
CCW-250-L4A3 250 L4 A3 1473
CCW-260-L4A3 260 L4 A3 —
CCW-295-L4A6 295 L4 A6 3939
CCW-300-L4A5 300 L4 A5 2553
CCW-350-L3A2 350 L3 A2 —
CCW-370-L4A3 370 L4 A3 —

⚠️ Fabric-level specifications, not classifications of finished garments. Actual performance must be confirmed by test reports for the relevant production batches.

Testing & Certification Framework

Recommended reporting format： EN 388:2016 Coupe Level Lx + ISO 13997 TDM Level Ay
Coupe and TDM use different test methods and cannot be directly converted. Both should be reported when both have been tested.
Cut resistance & mechanical: EN 388:2016 Coupe · ISO 13997 / EN ISO 13997 TDM · ASTM F2992 / ANSI/ISEA 105 · GB/T 19976 bursting · GB/T 3917.2 tear
Comfort & durability: GB/T 8629 wash & dry · GB/T 5453 air permeability · GB/T 12704 water-vapor transmission · GB/T 18401
Chemical safety: GB/T 2912.1 formaldehyde · GB/T 7573 pH · GB/T 17592 restricted azo dyes · GB 31701 / OEKO-TEX

Sports Applications

Section Title：​ One platform. Four high-barrier sports.

  • Short-Track Speed Skating​ — L4/L5 protection for mass-start and short-track suits
  • Competitive Skiing​ — XC / alpine / luge / skeleton race suits with close aerodynamic fit
  • Ice Hockey​ — Sublimated game jerseys and pants with tear & deformation resistance
  • Kart Racing​ — Abrasion-resistant race suits with torso stability and seat-belt friction resistance

Why ChisuCutWeave™

Balancing three competing requirements:

  1. Protection​ — Resistance to cutting, abrasion and sharp-edge contact
  2. Athletic Performance​ — Low weight, stretch, recovery and freedom of movement
  3. Wearability​ — Skin-contact comfort, breathability, low-temperature flexibility and durability

Differentiation: integrating cut-resistant fibers with elastic knitted structures and application-specific surface treatments — close-fitting, performance-oriented sportswear rather than a heavy protective textile.

Important Disclaimer

Specifications and performance levels are manufacturer-stated technical information until supported by independent laboratory reports. Fabric-level cut-resistance ratings do not, by themselves, establish the protective performance of a finished garment under actual sporting conditions. Final product selection should also consider seam construction, coverage, fit, abrasion, washing durability and sport-specific safety requirements. ChisuCutWeave™ does not claim to be completely cut-proof.

FAQ

Q: Is ChisuCutWeave™ completely cut-proof? A: No. It is engineered to reduce blade penetration depth, not to make the fabric cut-proof.
Q: Can I get a custom weight or rating for my team? A: Yes. The platform is configurable across weight, cut class, elasticity, finishes and knitting structure. MOQ is 1 piece for B2B clients; sample lead time 7–10 days.
Q: Are Coupe and TDM ratings interchangeable? A: No. They use different test methods and cannot be directly converted. We report both when both are tested.
Q: Does the fabric stay flexible in freezing conditions? A: Cold-Flex material selection and elastic formulation are designed to reduce stiffening at sub-zero temperatures.
Q: Can the fabric be sublimation printed? A: Yes. ChisuCutWeave™ is compatible with full digital sublimation, heat transfer and embroidery within our integrated production system.

CTA

Ready to specify ChisuCutWeave™ for your next race suit?

Share your fabric, fit and timeline. Our product team responds with a detailed quote and production plan within 24 hours. Physical samples in your chosen fabric and finish — in your hands in 7–15 days.